Adirondack Basement Systems

A sump pump is vital to any waterproofing system if one is to have any luck solving their moisture problems. If the sump isn’t up to snuff, then incoming water can easily overpower the system. This before and after set showcases our TripleSafe sump pump; a top-of-the-line product that can handle even the worst northeast storms. It can be installed right where your old pump is or, like in this photo, we can make space for it! Call today to schedule your FREE estimate and start the process to getting your basement protected!

These two photos showcase the difference that our Basement to Beautiful (B2B) product can make on a basement.  This is a very unique wall paneling system that creates a vapor barrier, holding back any moisture from passing through the porous concrete walls. The B2B panels are made with a 2 ½” graphite-infused SilverGlo Insulation and a lightweight metal stud system that is highly durable. The installation process is quick, efficient, and is ready to accept wall paneling, prepping your basement for any potential finishing you may desire. Also, it can also be fully integrated with any of our basement systems, which is exactly what this homeowner did. They purchased TripleSafe Sump System, which is a powerful product that can handle large amounts of water in case of bad flooding, but with all the other products they have installed—including the Basement to Beautiful, moisture will hardly have a chance of getting in. Any potential water from the walls will be redirected by the B2B directly into the sump pump and sent away from the house. Basement to Beautiful is a fantastic product for anyone looking to add a moisture barrier or finish their basement. 

This customer kept experiencing water leakage in their crawlspace that was puddling on the ground as well as issues with condensation. The source of the water was determined to be from leaks from the pipes or sewage, so our foreman, Daniel, came up with a plan that would ensure water would be the least of their worries! 

Here’s a look at how easily our CleanSpace system can fit into any basement or crawl space with no intrusion whatsoever. It doesn’t matter how old or new your basement or crawl space is, nor what the walls are made of, CleanSpace covers it all. Comprised of 4-layers of Polyethylene, CleanSpace is super durable and water resistant, acting as a highly effective vapor barrier for your home. No longer will seeping water be an issue, causing musty air quality that spreads throughout the rest of the house. 

This customer had purchased the property a little over a year prior to giving us a call to look at their crawlspace. The ground was more or less entirely dirt, which meant moisture had no problem getting in and disrupting the house. One of our design specialists met with the homeowner and inspected the area to determine some possible solutions. After getting a good feel for the space and what could be done to combat the moisture, we demoed the project for the homeowner, and they liked what they saw. The first big step for waterproofing this crawlspace was to install CleanSpace along the ground and walls to create a protective barrier from any invading water. Next, a SaniDry Sedona was put in to keep the humidity as low as possible. Installation of this product is easy due to the small size of the dehumidifier, but make no mistake; the SaniDry Sedona is powerful and effective against moisture in the air. With these two products working to protect the crawlspace, water problems won’t be a worry for this homeowner.

This set of photos showcases the versatility of CleanSpace. CleanSpace—a durable, reliable vapor barrier, is typically used on walls—but if the area in question is a crawl space or an unused basement, then it can also be spread on the floor to block moisture from coming up through the ground. And even if there’s a bunch of things in the way, CleanSpace can still be installed without a problem! This 4-layer polyethylene vapor barrier is the perfect choice to keep moisture to a minimum in your home!

This crawlspace had humidity and moisture problems as well as fiberglass insulation falling down and creating a mess. The homeowner was looking for a solution to prevent moisture and odors from coming into the home, as well as an efficient insulation solution. Our Foreman Sean installed CleanSpace vapor barrier along with SilverGlo insulation barrier to do just that. The homeowner also chose to have a SaniDry Sedona installed to help control the humidity and particles in the air beneath their home.

Here’s a look at the difference our EverLast windows can make to a basement. Old, worn windows don’t just look like an eye sore, they also can spell trouble for your basement or crawl space; water and bugs can get in, heat can get out,  you name it. Our EverLast windows are a great upgrade because each is custom-made for the spot it will be installed in so you know that it’ll be a perfect fit, and when it comes to windows, that’s absolutely vital. If you’re looking to spruce up the look of your home, combat water, mold, and mildew, and make your home more energy efficient in the process, look no further than our EverLast windows! 

Homeowner in Caroga Lake, NY was looking for a solution to a dry basement. Dampness and water seepage from the walls was a regular occurrence causing that all-too-familiar musty basement odor. Adirondack Basement Systems came in and installed a brand new TripleSafe Sump Pump along with WaterGuard to direct any water out of the basement, keeping it dry all the time.