Gutter Shutter of St. Cloud

This garage in Burnsville was pushing too much water onto the driveway, as evidenced by the several cracks in the cement, and causing foundation issues nearby in the home. The homeowners contacted our office looking to get some gutters on the garage and to add a piece to the home. 

The before photo showcases a planning photo from the salesman, conveying a visual aid for the installers of the downspout location and it's style. There would be another downspout on the other end of this wall made with different elbows, so clarity is key! After the installation, the same front is set with Gutter Shutter, fully protecting the driveway. Each side of the square garage had Gutter Shutter installed, creating a seamless barrier between all that water coming off the roof and the cement. 

Don't wait until the foundation issues start, contact our office today and prevent damages with the Gutter Shutter system!

Raymond M. Called in to have his gutters replaced. He had a leaf proof system that was clogged up and not working properly. We switched out the system with the Gutter Shutter System.  This house has a Gutter Shutter System on the front of the house. He is very excited to have a lifetime worry free gutter system on the rest of his house now!

This customer called in after experiencing storm damage, by hail and a fallen tree, to the existing hooded gutter system. With the opportunity for a full like-for-like replacement, this customer was easily able to switch over to Gutter Shutter after a meeting with our production manager, Jerry Gary. 

We replaced the system on the entire house with a perforated hood and added our wide mouth outlets to the existing downspouts to ensure maximal water flow. Showcased in these photos is the longest run that experienced damage, coming in at 92 feet of seamless gutter!

After a tree landed on her house, Joanne needed a lot of repairs done on part of her home. The contractor she was working with reached out to our office to see what we could offer for replacement on the affected areas of the house. Even though only a small portion of the original k-style gutters were directly affected by the damage, each section around the corner would need to be fully replaced to maintain a seamless design. Once all of the necessary repairs were complete, we were ready to put up the gutters. 

In a like-for-like replacement, we installed 110 feet of 5" k-style with a screen to assist in clogging protection from nearby trees. To ensure proper flow around the corners, and to tie into the undamaged gutters, outside box miters were installed and sealed. Our installation got the job done in just a couple of hours, providing a warrantied protection against future damages.

This homeowner saw our mailer ad for a premium gutter system and decided it was time for an upgrade. The existing seamed K-style gutters were not keeping up with the trees close to the house. 

After meeting with our salesman Kevin Feldewerd, the homeowner decided to replace all but one section with Gutter Shutter. The home had several uneven rooflines, leading to multiple gutter runs needing to connect indirectly. The previous system accomplished this by inefficiently dumping water onto the shingles to make its way into the gutter, as seen in the photo. 

To provide more efficient flow and 100% water capture, our installers cut directly into the hood and inserted the other run in. This direct connection blocks debris, creates a much cleaner look, and prevents any risk of damage to the roof. 

This is a brand-new cabin build. The homeowner is looking to make sure the water is efficiently captured off the metal roof and routed away from the home's foundation. Rest assure Gutter Shutter of St Cloud has the solution for your home, new or older we will help protect it. 

The Gutter Shutter System offers a great finished look to that brand new metal roof! 

Ed was in the market to put a first gutter system on his home. After receiving a company postcard in the mail, Ed called up our office and got an appointment set up with Kevin, our Minnesota salesman. Once he had a full installation plan in hand and saw a demonstration of our product, he signed off on the work and got our production department moving. 

In these photos, you can easily see the step-style fascia boards. To properly mount a gutter, a flush surface is needed to maintain the flow of the system and keep the water following the trough. We make this flush flush by bending up metal flashing at a 90 degree angle, twice, creating a square shape that adds depth to the recessed fascia board. In the installed photo, it is easy to see how the lower half of the gutter is not sitting against the lower board. 

The metal roof on this shop in Finlayson was a bit too much for the open-style gutters to handle. The 34-foot gutter was struggling to handle all of the water coming off the large roof and further struggled to drain it all effectively. Our installation of Gutter Shutter with a wide mouth outlet increased the trough size by 50%, doubled the drainage capacity from the gutter, and ensured better water capture from the roof!

Heavy snows from this past winter built up on the seamed open-style plastic gutters on a home in St. Cloud. One seam busted on a section near the front door, leading to a noticeable leak out of the gutter as the snow melted. The homeowner was ready for an upgrade and started researching different options online. After coming across our website, he reached out to our office and set up an appointment for a free estimate of gutter replacement. Kevin Feldewerd, our lead Gutter Shutter of St. Cloud salesman, was able to visit the home to draw up a quote and plan. 

With very few trees nearby, the homeowner was sure he wanted to stick with a open-style gutter system. Kevin then drew up a proposal for our premium RainGuttersXL system. These seamless rain gutters aren't your average open-top gutters. Heavy gauge aluminum gives them unmatched strength and the squared trough design nearly doubles the amount of water it can hold. To ensure no water dripped off the side of the roof, we also added in a small deflector piece to redirect water right into the gutter. Beyond the replacement of a plastic downspout with our 3x4 aluminum, the addition of a wide mouth outlet instantly doubled the drainage capacity from the system, pushing it down into a long downspout extension that would send all of the water away from the house and into the lawn. 

The old seamless gutter on this home in Sauk Rapids, MN was clogging, rusting, and leaking from its perch on an angled fascia board. With such a steep angle, the gutter had been mounted with inside hangers and wedges to keep it flowing towards the downspout end, which wear and tear eventually reduced. Gutter Shutter's extra-large gutter trough and our commitment to long-lasting design changes our approach to working on angled fascia boards.

Rather than using wedges that can rust out, we build out 1x6 boards to square off the angle and create a solid surface for the gutter to be mounted on. To ensure longevity and water protection, we also fully wrap the boards with a color-matched fascia wrap. The high-back design of Gutter Shutter also helps prevent water from slipping behind the gutter and into the fascia. This 33 foot piece of seamless gutter was installed with our solid-cover style to eliminate any chance of catching pine needles. All this would drain down to the far end downspout, equipped with our wide mouth outlet to ensure maximum drainage.